TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 524 of 1469
INSTALLATION
1.
Apply adhesive to mating surfaces of oil pump (Figure 2, Item 1) and transfer case (Figure 2, Item 2).
2.
Install oil pump (Figure 2, Item 1) on transfer case with six washers (Figure 2, Item 6) and screws
(Figure
2,
Item
5). Tighten screws (Figure 2, Item 5) 40 to 65 lb-ft (54 to 88 N·m).
3.
Apply antiseize tape to male threads of elbow (Figure 2, Item 3) and install on oil pump (Figure 2, Item 1).
4.
Connect hose (Figure 2, Item 4) to elbow (Figure 2, Item 3).
3
2
1
6
4
5
M7064DAA
Figure 2.
Transfer Case Oil Pump Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Fill transfer case to proper fluid level. (Volume 5, WP
0820)
2.
Start engine and check for leaks. Road test vehicle. (TM 9-2320-272-10)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-3
0399
0399-3/4 blank
Back to Top
