REMOVAL
WARNING
•
Do not disconnect air lines before draining air reservoirs. Small parts under pressure may
shoot out with high velocity. Failure to comply may result in injury or death to personnel.
•
Do not touch hot exhaust system components with bare hands. Failure to comply may
result in injury or death to personnel.
NOTE
•
Spring brake reservoir is located on the left frame rail next to the air cleaner.
•
Tag air lines for installation.
1.
Disconnect air lines (Figure 1, Items 5, 6, and 7) from elbows (Figure 1, Items 8, 9, and 10).
2.
Remove four locknuts (Figure 1, Item 4), washers (Figure 1, Item 3), two U-bolts (Figure 1, Item 11), and
emergency reservoir (Figure 1, Item 1) from two support brackets (Figure 1, Item 2). Discard locknuts.
TM 9-2320-272-23-3
0444
0444-2