REMOVAL
1.
Remove screw (Figure 1, Item 7), window handle (Figure 1, Item 8), and washer (Figure 1, Item 9) from shaft
(Figure 1, Item 10).
2.
Remove four screws (Figure 1, Item 1) and regulator (Figure 1, Item 6) from inner door panel
(Figure
1,
Item
2).
3.
Allow regulator arm stud (Figure 1, Item 3) to slide out of stationary track (Figure 1, Item 4) and remove through
door inspection hole (Figure 1, Item 5).
M5217DAA
5
6
10
9
8
7
1
2
3
4
Figure 1.
Window Removal.
END OF TASK
TM 9-2320-272-23-4
0608
0608-2