TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 471 of 1393
REMOVAL
NOTE
Tag wires for installation.
1.
Remove six screws (Figure 1, Item 21) and cover (Figure 1, Item 20) from load center (Figure 1, Item 15).
2.
Remove screw (Figure 1, Item 14) and wire (Figure 1, Item 13) from neutral buss bar (Figure 1, Item 16).
3.
Remove screw (Figure 1, Item 10) and wire (Figure 1, Item 11) from relay (Figure 1, Item 12).
4.
Remove two screws (Figure 1, Items 5 and 9) and wires (Figure 1, Item 7 and 8) from rear door blackout switch
(Figure 1, Item 6).
NOTE
Perform Steps (5) through (8) for left and right side of van body.
5.
Remove six screws (Figure 1, Item 24) and cover (Figure 1, Item 22) from van body (Figure 1, Item 26).
6.
Remove grommet (Figure 1, Item 4) from van body (Figure 1, Item 26).
7.
Remove grommet (Figure 1, Item 19), two screws (Figure 1, Item 17), and connector halves
(Figure 1, Item 18) from harness (Figure 1, Item 23) and cover (Figure 1, Item 22).
8.
Remove grommet (Figure 1, Item 3), two screws (Figure 1, Item 25), and connector halves (Figure 1, Item 1)
from harness (Figure 1, Item 23) and ceiling truss (Figure 1, Item 2).
9.
Pull harness (Figure 1, Item 23) through hole in ceiling truss (Figure 1, Item 2) and remove harness
(Figure
1,
Item
23) from load center (Figure 1, Item 15).
TM 9-2320-272-23-4
0635
0635-2
Back to Top
