REMOVAL
NOTE
Tag wires for installation.
1.
Disconnect wire (Figure 1, Item 3) from circuit breaker (Figure 1, Item 2).
2.
Remove two screws (Figure 1, Item 4) and clamps (Figure 1, Item 1) from wiring harness (Figure 1, Item 15)
and van body (Figure 1, Item 16).
3.
Remove locknut (Figure 1, Item 10), screw (Figure 1, Item 13), and clamp (Figure 1, Item 14) from spare tire
carrier mounting bracket (Figure 1, Item 5). Discard locknut.
4.
Remove locknut (Figure 1, Item 6), screw (Figure 1, Item 12), washer (Figure 1, Item 11), wires
(Figure 1, Items 8 and 9), and lockwasher (Figure 1, Item 7) from spare tire carrier mounting bracket
(Figure 1, Item 5). Discard locknut and lockwasher.
5.
Remove wiring harness (Figure 1, Item 15) from van body (Figure 1, Item 16).
6.
Disconnect emergency lamp wiring harness (Figure 1, Item 18) from circuit breaker (Figure 1, Item 2).
7.
Remove two screws (Figure 1, Item 17) and circuit breaker (Figure 1, Item 2) from van body
(Figure 1, Item 16).
TM 9-2320-272-23-4
0636
0636-2