TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 485 of 1393

INSTALLATION

NOTE

Safety wire will be used to route wires through van body.

1.

Feed wires (Figure 2, Items 1 and 16) through electrical box (Figure 2, Item 12), load center

(Figure 2, Item 4), and van body (Figure 2, Item 11).

2.

Connect connector (Figure 2, Item 10) to receptacle (Figure 2, Item 9).

3.

Install receptacle (Figure 2, Item 9) on van body (Figure 2, Item 11) with four screws (Figure 2, Item 8) and

locknuts (Figure 2, Item 13).

4.

Install plate (Figure 2, Item 6) on electrical box (Figure 2, Item 12) with three screws (Figure 2, Item 7).

5.

Install wire (Figure 2, Item 1) on neutral buss bar (Figure 2, Item 3) with setscrew (Figure 2, Item 2).

6.

Install three wires (Figure 2, Item 16) on circuit breakers (Figure 2, Item 5) with three screws

(Figure 2, Item 15).

7.

Install cover (Figure 2, Item 17) on load center (Figure 2, Item 4) with six screws (Figure 2, Item 14).

TM 9-2320-272-23-4

0637

0637-4