INSTALLATION
1.
Install circuit breaker (Figure 2, Item 2) on van body (Figure 2, Item 16) with two screws (Figure 2, Item 17).
2.
Connect emergency lamp wiring harness (Figure 2, Item 18) to circuit breaker (Figure 2, Item 2).
3.
Install lockwasher (Figure 2, Item 7) and wires (Figure 2, Items 8 and 9) on spare tire carrier mounting bracket
(Figure 2, Item 5) with washer (Figure 2, Item 11), screw (Figure 2, Item 12), and locknut (Figure
2, Item 6).
4.
Install wiring harness (Figure 2, Item 15) on spare tire carrier mounting bracket (Figure 2, Item 5) with screw
(Figure 2, Item 8), clamp (Figure 2, Item 14), and locknut (Figure 2, Item 10).
5.
Install two clamps (Figure 2, Item 1) and wiring harness (Figure 2, Item 15) and van body (Figure 2, Item 16)
with two screws (Figure 2, Item 4).
6.
Connect wire (Figure 2, Item 3) to circuit breaker (Figure 2, Item 2).
TM 9-2320-272-23-4
0636
0636-4