TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 803 of 1393

REMOVAL

WARNING

Wear hand protection when handling winch cable. Do not handle cable with bare hands.

Broken wires may be sharp. Failure to comply may result in injury or death to personnel.

1.

Remove setscrew (Figure 1, Item 1) and winch cable (Figure 1, Item 4) from hole (Figure 1, Item 3) in winch

drum (Figure 1, Item 2).

NOTE

Perform Step (2) if front winch is equipped with level wind and tensioner.

2.

Pull winch cable (Figure 1, Item 4) out at side roller (Figure 1, Item 9), over level wind pulley

(Figure

1,

Item

6), down through tensioner sheaves (Figure 1, Item 7), and out of rollers

(Figure

1,

Items

8

and

9).

TM 9-2320-272-23-4

0684

0684-2