INSTALLATION
1.
Install six washers (Figure 2, Item 19), mounting bracket (Figure 2, Item 20), and lifting bracket
(Figure 2, Item 21) on van body (Figure 2, Item 1) with three screws (Figure 2, Item 16), lockwashers
(Figure 2, Item 22), and nuts (Figure 2, Item 11).
2.
Close heater access door (Figure 2, Item 18) and install two screws (Figure 2, Item 17) on heater access door.
3.
Install mounting plate (Figure 2, Item 13) on support tube (Figure 2, Item 12).
4.
Install support tube (Figure 2, Item 12) on mounting bracket (Figure 2, Item 20) with wing screw
(Figure 2, Item 15).
5.
Install harness (Figure 2, Item 4) on support tube (Figure 2, Item 12) with tiedown strap
(Figure 2, Item 14).
6.
Install mounting bracket (Figure 2, Item 9) and lifting bracket (Figure 2, Item 8) on van body (Figure 2, Item 1)
with three lockwashers (Figure 2, Item 7) and screws (Figure 2, Item 6).
7.
Install mounting plate (Figure 2, Item 2) on support tube (Figure 2, Item 10).
8.
Install support tube (Figure 2, Item 10) on mounting bracket (Figure 2, Item 9) with wing screw
(Figure
2,
Item
5).
9.
Install harness (Figure 2, Item 4) on support tube (Figure 2, Item 10) with tiedown strap
(Figure 2, Item 3).
TM 9-2320-272-23-5
0794
0794-4