TM-9-2320-272-23-5

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-5 - Page 241 of 623

REMOVAL

NOTE

Right and left convoy warning light mounts are replaced the same. This procedure covers the

right mount only.

1.

Disconnect two cable leads (Figure 1, Item 8) from harness leads (Figure 1, Item 7).

2.

Remove two cable leads (Figure 1, Item 8) from support tube (Figure 1, Item 2) and mounting bracket

(Figure

1,

Item

11).

3.

Remove wing screw (Figure 1, Item 3) and support tube (Figure 1, Item 2) from mounting bracket

(Figure

1,

Item

11).

4.

Remove mounting plate (Figure 1, Item 1) from support tube (Figure 1, Item 2).

5.

Remove four locknuts (Figure 1, Item 5), washers (Figure 1, Item 4), screws (Figure 1, Item 10), washers

(Figure 1, Item 9), and mounting bracket (Figure 1, Item 11) from cab protector (Figure 1, Item 6).

Discard

locknuts.

TM 9-2320-272-23-5

0795

0795-2