TM-9-2320-272-23-5

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-5 - Page 259 of 623

REMOVAL

NOTE

Note routing of harness for installation.

1.

Remove two tiedown straps (Figure 1, Item 5) and harness (Figure 1, Item 6) from two support tubes

(Figure

1,

Item 4) and van body (Figure 1, Item 3). Discard tiedown straps.

2.

Remove 25 screws (Figure 1, Item1), clamps (Figure 1, Item 2), and harness (Figure 1, Item 6) from van body

(Figure 1, Item 3).

3.

Remove four screw assembled lockwashers (Figure 1, Item 19), washers (Figure 1, Item 20), clamps

(Figure

1,

Item 21), and harness (Figure 1, Item 6) from van body (Figure 1, Item 3). Discard screw

assembled

lockwashers.

4.

Remove five screws (Figure 1, Item 18), clamps (Figure 1, Item 17), and harness (Figure 1, Item 6) from van

body (Figure 1, Item 3).

5.

Remove three screw assembled lockwashers (Figure 1, Item 14), washers (Figure 1, Item 15), clamps

(Figure

1,

Item 16), and harness (Figure 1, Item 6) from van body (Figure 1, Item 3). Discard screw

assembled

lockwashers.

6.

Disconnect harness lead (Figure 1, Item 13) from wire (Figure 1, Item 12).

7.

Remove locknut (Figure 1, Item 11), washer (Figure 1, Item 9), screw (Figure 1, Item 7), washer

(Figure

1,

Item

9), and ground lead (Figure 1, Item 8) from fuel tank support (Figure 1, Item 10).

Discard

locknut.

TM 9-2320-272-23-5

0798

0798-2