INSTALLATION
1.
Install ground lead (Figure 2, Item 8) on fuel tank support (Figure 2, Item 10) with washer (Figure 2, Item 9),
screw (Figure 2, Item 7), washer (Figure 2, Item 9), and locknut (Figure 2, Item 11).
2.
Connect lead (Figure 2, Item13) to wire (Figure 2, Item 12).
3.
Install harness (Figure 2, Item 6) on van body (Figure 2, Item 3) with three clamps (Figure 2, Item 16), washers
(Figure 2, Item 15), and screw assembled lockwashers (Figure 2, Item 14).
4.
Install harness (Figure 2, Item 6) on van body (Figure 2, Item 3) with five clamps (Figure 2, Item 17) and screws
(Figure 2, Item 18).
5.
Install harness (Figure 2, Item 6) on van body (Figure 2, Item 3) with four clamps (Figure 2, Item 21), washers
(Figure 2, Item 20), and screw assembled lockwashers (Figure 2, Item 19).
6.
Install harness (Figure 2, Item 6) on van body (Figure 2, Item 3) with 25 clamps (Figure 2, Item 2) and screws
(Figure 2, Item 1).
7.
Install harness (Figure 2, Item 6) on two support tubes (Figure 2, Item 4) and van body (Figure 2, Item 3) with
two tiedown straps (Figure 2, Item 5).
TM 9-2320-272-23-5
0798
0798-4