TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 254 of 623
REMOVAL - Continued
4.
Disconnect lead (Figure 2, Item 7) from cable (Figure 2, Item 5).
5.
Remove locknut (Figure 2, Item 8), washer (Figure 2, Item 9), ground lead (Figure 2, Item 13), lockwasher
(Figure 2, Item 10), screw (Figure 2, Item 12), and washer (Figure 2, Item 11) from crossmember
(Figure
2,
Item 6). Discard locknut and lockwasher.
6.
Remove locknut (Figure 2, Item 1), screw (Figure 2, Item 14), clamp (Figure 2, Item 16), and conduit
(Figure
2,
Item 19) from crossmember (Figure 2, Item 2). Discard locknut.
7.
Remove screw (Figure 2, Item 15), clamp (Figure 2, Item 17), and conduit (Figure 2, Item 19) from frame
(Figure 2, Item 3).
8.
Remove two tiedown straps (Figure 2, Item 4) from conduit (Figure 2, Item 19). Discard tiedown straps.
NOTE
Note routing of conduit for installation.
9.
Remove conduit (Figure 2, Item 19) from front of cab protector (Figure 1, Item 12) and dump body
(Figure
1,
Item 9).
10.
Remove conduit (Figure 2, Item 19) from harness (Figure 2, Item 18).
3
4
5
M9553DAA
19
1
2
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Figure 2.
Convoy Warning Light Harness Removal.
END OF TASK
TM 9-2320-272-23-5
0797
0797-3
Back to Top
