TM-9-2320-272-24-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4
JUNE 1998
TM-9-2320-272-24-2 - Page 165 of 991
TM 9-2320-272-24-2
3-288. CAB GRAB HANDLE REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
All
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic’s tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
Parking brake set (TM 9-2320-272-10).
Four locknuts (Appendix D, Item 313)
Adhesive (Appendix C, Item 7)
a. Removal
1.
Lift insulation and cut two square patches to gain access to locknuts (5) and reinforcing
plates (4). Save patches for installation.
2.
Remove four locknuts (5), screws (1), two reinforcing plates (4), and grab handle (2) from cab (3).
Discard locknuts (5).
b. Installation
1.
Install grab handle (2) on cab (3) with four screws (1), two reinforcing plates (4), and four new
locknuts (5).
2.
Install insulation on cab (3) with adhesive.
3-773
Back to Top
