TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

TM-9-2320-272-24-2 - Page 171 of 991

TM 9-2320-272-24-2

3-290. REAR VIEW MIRROR AND BRACE REPLACEMENT (Contd)

b. Installation

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Install bracket (25) and cowl plate (33) on cowl side panel (35) with two screws (32) and two new

locknuts (34).

Install braces (13), (4), (16), (37), (38), (20), (18), and two gaskets (3) on rod (17) with two washers (1)

and new locknuts (2).

Install mirror braces (20) and (37) on cab cowl bracket (25) with screw (21), washer (26), and new

locknut (27).

Remove hinge screw (36) from top door hinge (22).

Position upper mirror brace (38) and mirror brace (16) over upper door hinge (22) and install hinge

screw (36) through brace (38) and hinge (22) with washer (23) and new locknut (24).

Remove hinge screw (19) from lower door hinge (28).

Position lower mirror brace (18) over lower door hinge (28) and insert hinge screw (19) through

brace (18) and hinge (28) and secure with washer (29) and new locknut (30).

Install two clamp halves (12) on upper brace (13) with screw (15), new lockwasher (11), and nut (10).

Install convex mirror (5) on clamp halves (12) with new screw-assembled lockwasher (14).

Position rearview mirror (9) and two spacers (8) on mirror brace (4) and install with two washers (7)

and new locknuts (6).

3-779