TM-9-2320-272-24-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4
JUNE 1998
TM-9-2320-272-24-2 - Page 184 of 991
TM 9-2320-272-24-2
3-298. VENT DOOR WEATHERSEAL REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic’s tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
Parking brake set (TM 9-2320-272-10).
Vent door weatherseal (Appendix D, Item 710)
Adhesive (Appendix C, Item 7)
a. Removal
1.
Open vent door (2).
2.
Remove vent door weatherseal (3) from vent door (2). Discard weatherseal (3).
b. Installation
NOTE
Surface of cowl vent door opening must be clean, dry, and free of
oil and grease before seal is installed.
1.
Apply thin coat of adhesive to mating surfaces of vent door (2) and new weatherseal (3) and allow to
dry until tacky.
2.
Position weatherseal (3) into channel (1) of vent door (2) and press firmly into place.
3-792
Back to Top
