TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

  TM-9-2320-272-24-2 - Page 444 of 991

3-415. PIONEER
TM 9-2320-272-24-2
THIS TASK COVERS:
a. Bracket Removal (M923, M925,
d.
Bracket Installation (M931, M932)
M927, M928)
e.
Bracket Removal (M929, M930)
b. Bracket Installation (M923, M925,
f.
Bracket Installation (M929, M930)
M927, M928)
g.
Bracket Removal (M929A1, M930A1)
c. Bracket Removal (M931, M932)
h.
Bracket Installation (M929A1, M930A1)
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M923, M925, M927, M928, M929/A1, M930/A2,
TM 9-2320-272-10
M931, M932
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic’s tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Four locknuts (M923, M925, M927, M928,
M929A1, M930A1, M931, M9321
(Appendix D, Item 291)
Five locknuts (M931, M932)
(Appendix D, Item 291)
Eight locknuts (M929, M930)
(Appendix D, Item 376)
1.
Open toolbox door (3).
2.
Remove four locknuts (5), washers (6), screws (1), and bracket (2) from toolbox (4). Discard
locknuts (5).
b. Bracket Installation (M923, M925, M927, M928)
1.
Install bracket (2) on toolbox (4) with four screws (1), washers (6), and new locknuts (5).
2.
Close toolbox door (3).
1.
Open toolbox door (11).
2.
Remove five locknuts (10), washers (9), screws (8), and bracket (7) from toolbox (4). Discard
locknuts (10).
1.
Install bracket (7) on toolbox (4) with five screws (8), washers (9), and new locknuts (10).
2.
Close toolbox door (11).
3-1052


Back to Top