TM 9-2320-272-24-2
4-4. POWER PLANT (M939/A1) REPLACEMENT (Contd)
45.
46.
47.
48.
49.
50.
51.
52.
Connect return spring (44) to link (47) and fuel primer pump bracket (43).
Install emergency stop cable (23) in swivel block (29).
Install connector (22) on cable (23) and tighten connector screw (30).
Install cable (23) on clamp bracket (28) with clamp (26), washer (24), screw (25), and nut (27).
Install wires (32) and (33) on fuel shutoff solenoid (31) with nut (34).
Install pump throttle lever (35) on accelerator rod (37) with screw (38) and new locknut (36).
Install pump throttle lever (35) on link (47) with screw (48) and new locknut (39).
Install modulator cable (42) on fuel primer pump bracket (43) with shim (40), clamp (45), two
screws (46), and nuts (41).
4-63