TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 213 of 452
MUD FLAP STOWAGE
NOTE
When towing an M127 trailer, the rear mud flaps must be
removed from normal position and stowed on stowage
brackets.
1. Remove retaining pin from each mud flap.
NOTE
It may be necessary to tap upward on the mud flap spring
with a hammer or similar tool.
2. Remove mud flaps by pulling up on spring.
3. Insert mud flaps in stowage brackets on right frame rail.
4. Insert retaining pins in springs.
5. When towing operations are complete, install mud flaps and retaining pins in
normal position.
END OF TASK
Figure 12. Mud Flap Stowage.
SPRING
MUD
FLAP
RETAINING
PIN
SPRING
MUD
FLAP
RETAINING PIN
STOWAGE
BRACKET
TM 9-2320-273-10
0012
0012-15
Back to Top
