TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 219 of 452
OPERATING WINCH (M916 AND M920) - CONTINUED
NOTE
High speed winch operation is recommended for paying out
line or taking up slack only.
5. To run winch in high speed, push down and hold winch control lever 2. This
doubles winch speed.
6. When the desired amount of line has been paid out, stop winch by releasing both
control levers.
END OF TASK
Figure 16. Winch Operator Station.
WINCH
OPERATOR
STATION
WINCH
CONTROL
LEVER 2
WINCH
CONTROL
LEVER 1
TM 9-2320-273-10
0012
0012-21
Back to Top
