TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 214 of 452
PREPARATION FOR LOADING LIGHT AND MEDIUM EQUIPMENT TRAILERS
(M916 AND M920)
1.
Align tractor and semi-trailer as close as possible to front of payload equipment.
2. Place transmission ratio selector in neutral (N).
3. Apply parking brakes.
4. Prepare semi-trailer for loading.
END OF TASK
WINCH (M916 AND M920)
The M916 and M920 are each equipped with a full hydraulic winch mounted on the
frame behind the cab as shown below. The winch has a fail-safe spring-loaded brake
which automatically sets any time the winch control valve is in neutral or in case of
power failure (hydraulic pressure drops to less than 200 psi). The winch operates at
2,100 psi hydraulic pressure from a dual pump which is driven by a power takeoff on
the transmission. The rated capacity of the winch is 45,000 lb (20,250 kg).
END OF TASK
Figure 13. Winch Components.
WINCH HYDRAULIC
OIL RESERVOIR WINCH BRAKE
WINCH DRUM
WIRE ROPE
WINCH
CONTROLS
WINCH
OPERATOR
STATION
TM 9-2320-273-10
0012
0012-16
Back to Top
