TM-9-2320-273-10

TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; OPERATOR’S MANUAL

DECEMBER 2012

TM-9-2320-273-10 - Page 257 of 452

OPERATOR MAINTENANCE

OPERATION UNDER UNUSUAL CONDITIONS

FORDING OPERATION

INITIAL SETUP:

References

WP 0010

WP 0034

WP 0035

BEFORE FORDING

WARNING

Due to increased weight and raised center of gravity on

vehicles equipped with Crew Protection Kit, vehicle operator

must be aware of differences in driving characteristics and

adjust driving accordingly. Failure to comply may result in

damage to equipment or possible injury or death to

personnel. Seek medical attention in the event of an injury.

1. Before fording with the vehicle, check bottom surface condition of the water

body. Ensure bottom surface is hard enough to ford without exceeding the

maximum fording depth of 20 inches (51 cm). If the bottom surface is too soft,

do not attempt fording. Ford to the maximum depth for short periods or short

distances only.

2. Ensure engine is operating properly before entering water.

3. Lubricate unpainted surfaces properly before entering water.

TM 9-2320-273-10

0019

0019-1