TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 258 of 452
BEFORE FORDING - CONTINUED
4. Engage driveline locking system. Move inter-axle differential control
(Figure 1, Item 2) to the LOCK position. For instructions on operating the
inter-axle differential lockup system, refer to WP 0010.
END OF TASK
DURING FORDING
1. Put transmission selector lever (Figure 1, Item 1) in a low gear range.
2. Enter water slowly.
3. Observe speedometer (Figure 1, Item 3) and ford at speeds of no more than
3–4 mph (5–6 kph).
4. When vehicle emerges from water, apply brakes repeatedly to dry brake linings.
Ensure brakes are working properly before driving vehicle at normal speeds.
END OF TASK
Figure 1. Fording.
1
2
3
TM 9-2320-273-10
0019
0019-2
Back to Top
