TM-9-2320-273-10

TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; OPERATOR’S MANUAL

DECEMBER 2012

TM-9-2320-273-10 - Page 263 of 452

MANUALLY RELEASING SPRING BRAKE POWER SPRING

NOTE

If power springs have been manually compressed, perform

steps 1 through 4 to release them before returning vehicle to

service.

1. Remove nut (Figure 1, Item 3) and washer (Figure 1, Item 2) from release stud

(Figure 1, Item 1).

2. Disengage cross-pin end of release stud (Figure 1, Item 1) from pressure plate

(Figure 1, Item 5) and remove release stud (Figure 1, Item 1) from spring

chamber (Figure 1, Item 6).

3. Install dust cover (Figure 1, Item 4) on spring chamber (Figure 1, Item 6).

4. Install release stud (Figure 1, Item 1) in stowage pocket (Figure 1, Item 7) with

washer (Figure 1, Item 2) and nut (Figure 1, Item 3).

END OF TASK

END OF WORK PACKAGE

TM 9-2320-273-10

0020

0020-3/4 blank