TM-9-2320-273-20

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE

NOVEMBER 1980

TM-9-2320-273-20 - Page 421 of 1500

TM 9-2320-273-20

5-6. TEST EQUIPMENT (Continued).

b. Using the Ohms Seale.

The Ohms Scale (fig. 5-2 thru fig, 5-4) is used to make tests for

continuity, shorts, and resistance. The multi meter must be set up and “zeroed” before making

these tests. Do the following steps that match the multi meter you have:

Figure 5-2. Using the Ohms Scale and “Zeroing” Multimeter AN/URM-105

NOTE

If needle will not “zero,” replace the batteries.

If the needle still will not “zero” after replac-

ing the batteries, turn the meter in for repair.

TA 074691

5-5