TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont
7-73.3. TOW LIGHT ASSEMBLY REPAIR (M984E1) (CONT).
a. Removal.
(1)
Remove two locknuts (1), screws (2), and four
emergency straps (3).
●
Tag and mark wires before removing.
●
Cut plastic cable ties as necessary.
(2)
Disconnect 11 connectors (4) from
connectors (5).
(3)
Push 11 connectors (4) back on wires (6)
and remove pins (7) and washers (8).
NOTE
Mark position of ground wire and screw to
aid installation.
(4)
(5)
(6)
(7)
(8)
Remove screw (9), lockwasher (10), and
connector (11).
Remove two ground wires (12) from
connector (11).
Remove nut (13), lockwasher (14), and connector (15) from tow light tab (16).
Remove eight wires (17) from connector (15).
Remove eight pins (18) from wires (17).
7-273