(9)
TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
Remove two nuts (19), lockwashers (20),
screws (21), clips (22), wiring
harness (23), and clearance light
bracket (24).
NOTE
All three clearance lights are removed the same way.
(10)
(11)
(12)
(13)
(14)
(15)
7-274
Remove two screws (25), lens (26), and bulb (27) from
lampholder (28).
Remove two screws (29), lampholder (28), and gasket (30)
from clearance light bracket (24).
Remove three screws (31),
lockwashers (32), and two composite
lights (33) from tube (34).
Remove two wingnuts (35),
washers (36), screws (37), and
brackets (38) from tube (16).
Remove four screws (39), nuts (40),
lockwashers (41), and bumpers (42) from
two brackets (38).
Remove two screws (43) and
bumpers (44) from tube (34).