TM 9-2320-279-20-1
(7)
(8)
(9)
(10)
(1)
(2)
(3)
Electrical System Maintenance Instructions (Cont)
Connect wires (1 and 5)
using butt connector.
Install three preformed
packings (12).
Install three lamps (13) in
clearance lights (3).
Install three lenses (14).
c. Follow-on Maintenance.
Connect batteries
(para 7-91).
Check operation of
clearance lights
(TM 9-2320-279-10).
Close pump module rear
access doors
(TM 9-2320-279-10).
END OF TASK
7-76. PUMP MODULE COMPARTMENT LIGHTS REMOVAL/INSTALLATION (M978).
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
M978
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-10 Pump module rear access
None
doors opened.
Supplies
Para 7-91
Batteries disconnected.
Connectors, electrical, butt, Item 19,
Special Environmental Conditions
Appendix C
None
Tags, identification, Item 48, Appendix C
General Safety Instructions
Personnel Required
No smoking, flame, sparks, and hot or glowing
MOS 63S, Heavy wheel vehicle mechanic
objects within 50 ft (15 m) of vehicle.
7-282