TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-73.3. TOW LIGHT ASSEMBLY REPAIR (M984E1) (CONT).
(1)
(2)
(3)
(4)
b. Installation.
Install two bumpers (1) on tube (2) with
screws (3).
Install four bumpers (4) on two
brackets (5) with four screws (6),
lockwashers (7), and nuts (8).
Install two brackets (5) on tube (2) with
screws (9), washers (10), and
wingnuts (11).
Install two composite lights (12) on
tube (2) with three screws (13) and
lockwashers (14).
All three clearance lights are installed the same way.
(5)
(6)
Install gasket (15) and lampholder (16) on clearance light
bracket (17) with two screws (18).
Install bulb (19) and lens (20) in lampholder (16) with two
screws (21).
(7)
Install eight pins (22) on wires (23).
(8) Install eight wires (23) in connector (24).
7-275