TM 9-2320-279-34- 1
Electrical System Maintenance Instructions (Cont)
(44)
Disconnect two connectors (107).
(45)
Remove three screws (108), washers (109), and clamps (11O) holding cab wiring harness (95).
(46)
Remove 12 screws (111) and three receptacles (112) from console (54).
(47)
Remove cab wiring harness (95).
b. Installation .
(1)
(2)
(3)
NOT E
All cab wiring harness connections need to be secure. Tie all excess wiring
together with plastic cable ties.
Install cab wiring harness (1) in console (2).
Push domelight wire (3), three neutral start switch wires (4), and left step clea
wire (5) through grommet (6).
Install grommet (6) in console (2).
rance light
6-7 9