TM 9-2320-279-34- 1
Electrical System Maintenance Instructions (Cont)
6-14. ENGINE WIRING HARNESS REMOVAL/INSTALLATION (CONT).
a. Removal .
NOT E
●
Tag and mark all connections and wires before disconnecting.
●
Cut plastic cable ties as necessary.
(1)
Disconnect two connectors (1) from two receptacles (2).
(2) Disconnect two-pin connector (3).
NOT E
M984E1 has only two cushion clips.
(3)
Remove screw (4), washer (5), and cushion clip (6) to free engine harness (7) from lower right
flange of transmission (8).
6-8 8