TM-9-2320-279-34-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 1 OF 3

TM-9-2320-279-34-1 - Page 313 of 709

TM 9-2320-279-34- 1

Electrical System Maintenance Instructions (Cont)

6-13. CAB WIRING HARNESS REMOVAL/INSTALLATION (CONT).

(4)

(5)

(6)

(7)

(8)

(9)

(10)

Install three receptacles (7) with 12

screws (8).

Install three clamps (9) with screws (10)

and washers (11).

Connect two connectors (12).

Connect two harness wires (13) to

starter relay (14).

Connect one harness wire (15) to horn

relay (16).

Connect cab wiring harness (1) to circuit

breaker rack (17).

Pull right composite light

wires (18) through hole in

heater compartment (19).

NOT E

Tie right composite light wires

with plastic cable ties.

(11)

(12)

(13)

(14)

6-8 0

Route right composite light

wires (18) through clip (20)

and install clip to glove

box (21) with screw (22),

washer (23),

lockwasher (24), and

nut (25).

Connect three right

composite light wires (18) to

wire connectors (26).

Connect three plugs (27) to

right headlight (28),

Install headlight guard (29)

with four screws (30).