TM-9-2320-279-34-2
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3
TM-9-2320-279-34-2 - Page 18 of 632
TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
(3)
Remove screw (4), washer (5),
locknut (6), and clamp (7).
CAUTION
Model 650 axle weighs approximately
1400 lbs. (650 kg). Be sure lifting device
used for this task is adequate.
(4)
Soldier A and Soldier B secure axle (8) to
suitable lifting device.
(5)
(6)
(7)
(8)
(9)
TA476435
NOTE
Remove tie wraps and clamps as necessary.
Remove two nuts (9), washers (10), and screws (11) from torque rod (12).
Loosen two nuts (13).
NOTE
Mark beam end adapters removed from short side of axle housing.
Remove two cotter pins (14), nuts (15), shafts (16), and four beam end adapters (17) from two
equalizer beams (18).
Remove cotter pins (19), and nuts (20) from shafts (16).
WARNING
Axle is very heavy. Keep out from under heavy parts. Falling parts can cause
serious injury or death.
Soldier A and Soldier B remove axle (8).
10-6.1
Back to Top
