TM-9-2320-279-34-2
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3
TM-9-2320-279-34-2 - Page 29 of 632
TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
e. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1)
Apply silicone adhesive-sealant to
housing and install cover (1) with four
dowel bushings (2), 11 lockwashers (3),
and nuts (4). Tighten nuts to 110 to
130 lb-ft (149 to 176 N•m).
(2)
Install lockwashers (5) and screw (6). Tighten screw to 75 to 85 lb-ft (101 to 115 N•m).
f. Follow-on Maintenance.
(1)
Install yoke and oil seal (para 10-6).
(2)
Lubricate axle (LO 9-2320-279-12).
END OF TASK
10-5. AXLE HOUSING COVER, AXLE NO. 4 (AXLE MODELS 580 AND 650)
REMOVAL/REPAIR/INSTALLATION (M984, M984E1).
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
References
M984, M984E1
None
Test
Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
LO 9-2320-279-12 Axle drained.
None
Special Environmental Conditions
Supplies
None
Solvent, dry cleaning, Item 57, Appendix C
Adhesive-sealant, silicone, Item 6, Appendix C
General Safety Instructions
None
Personnel Required
MOS 63W, Wheel vehicle repairer
Level
of
Maintenance
Direct Support
10-11
Back to Top
