TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 146 of 951

TM 9-2320-280-20-2

3-69. RADIATOR INLET HOSE REPLACEMENT

This task covers:

a. Removal

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1

Manual References

TM 9-2320-280-24P

b. Installation

Equipment Condition

Cooling system depressurized (para. 3-60).

a. Removal

1. Loosen two clamps (2) and remove hose (3) from radiator (1) and water crossover (4).

2. Remove two clamps (2) from hose (3).

1. Install two clamps (2) to hose (3).

NOT E

For vehicles equipped with a 200 amp alternator, it is recommended

that the inlet hose be installed with the hose twisted counterclockwise

and upward until a kink in the hose starts to form.

2. Install hose (3) on water crossover (4) and radiator (1) with two clamps (2).

FOLLOW-ON TASK: Tighten coolant filler cap (para. 3-60).

3-124