TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

  TM-9-2320-280-20-2 - Page 149 of 951

3 - 7 2 .
WATER PUMP INLET HOSE REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1 .
Loosen two clamps (2) and remove water pump inlet hose (3) from water pump (1) and lower tube
assembly (4).
2.
Remove two clamps (2) from hose (3).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
Equipment Condition
Cooling system drained (para. 3-60).
b. Installation
1.
Install two clamps (2) to hose (3).
2
.
Install water pump inlet hose (3) on lower tube assembly (4) and water pump (1) with two clamps (2).
3.
Tighten clamps (2) to 40 lb-in. (5 N
m).
TM 9-2320-280-20-2
Change 2
3 - 1 2 7
FOLLOW-ON TASK: Fill cooling system (para. 3-60).


Back to Top