TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 181 of 951

4-2.1. 60 AMPERE ALTERNATOR REGULATOR REPLACEMENT

This task covers:

a. Removal

b.

Installation

a. Removal

INITIAL SETUP:

Tools

____

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

____________

O-ring (Appendix G, Item 218)

Manual References

________________

TM 9-2320-280-24P

Equipment Condition

__________________

60 ampere alternator removed (para. 4-2).

TM 9-2320-280-20-2

4-6.2

Change 3

NOTE

Regulator is part of end cover. Do not disassemble.

1.

Remove six screws (1), end cover (2), and O-ring (3) from end housing (4). Discard O-ring (3).

2.

Disconnect four leads (6) from terminals (7) on regulator (8).

b. Installation

1.

Install O-ring (3) on end cover (2).

2.

Connect four leads (6) to terminals (7) on regulator (8).

3.

Install end cover (2) on end housing (4) with six screws (1).

4.

Check alternator (5) for correct output voltage (para. 4-2, task c.).