TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

  TM-9-2320-280-20-2 - Page 189 of 951

TM 9-2320-280-20-2
4-6.10
Change 2
4-2.2. 100/200 AMPERE ALT E R N ATOR CABLE REPLACEMENT ( Co n
t ’ d )
NOTE
• Prior to removal, tag leads for installation.
• Note number of clamps and tiedown straps for installation.
1.
Slide back rubber boot (9) and remove nut (12), washer (13), and cable (11) from regulator (10).
2.
Remove six tiedown straps (8) from cables (1), (6), and (11). Discard tiedown straps (8).
3.
Remove nut (5), lockwasher (4), washer (3), clamp (2), and cables (1) and (6) from stud (7). Discard
lockwasher (4).
4.
Remove nut (16), lockwasher (15), washer (14), clamp (17), and cables (1) and (6) from stud (18).
Discard lockwasher (15).
5.
Remove screw (20), clamp (19), nut (27), lockwasher (26), screw (22), washer (23), clamp (24), and
cables (1) and (6) from bracket (25) and body (21). Discard lockwasher (26).
c. 12-Volt Regulator Cable Removal


Back to Top