TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 362 of 951

This task covers:

a. Removal

b. Installation

a. Removal

INITIAL SETUP:

Applicable Models

M997A2, M1025A2, M1035A2,

M1043A2, M1045A2, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Material/Parts

Two tiedown straps (Appendix G, Item 312)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

• Battery ground cables disconnected (para. 4-73).

• Hood raised and secured (TM 9-2320-280-10).

• Engine access cover removed (para. 10-15).

TM 9-2320-280-20-2

4-124

Change 3

1.

Slide back rubber boot (9) and remove nut (8), washer (7), and cable (1) from regulator (6).

2.

Remove capscrew (3) securing clamp (4) and cable (1) to bracket (2).

3.

Remove two tiedown straps (10) from cable (1). Discard tiedown straps (10).

4.

Remove nut (15), screw (11), cable (1), leads (12), and cable (13) from terminal clamp (14) and

remove cable (1) from battery box (16) and engine (5).

NOTE

Prior to removal, tag leads for installation.

4-75. 12 VOLT ALTERNATOR CABLE REPLACEMENT