TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 365 of 951

4-76. BUSS BAR REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

M997A2, M1025A2, M1035A2,

M1043A2, M1045A2, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Five lockwashers (Appendix G, Item 150)

Lockwasher (Appendix G, Item 141)

Silicone compound (Appendix C, Item 48)

Equipment Condition

Battery removed (para. 4-79).

1.

Remove five nuts (9), lockwashers (8), and washers (7), engine harness cable (6), alternator

cable (10), battery cable (11), umbilical power cable (12) (M1097A2 vehicles only), and slave

receptacle cable (13) from buss bar (2). Discard lockwashers (8).

2.

Remove nut (5), lockwasher (4), washer (3), and buss bar (2) from power feed through stud (1).

Discard lockwasher (4).

1.

Install buss bar (2) to power feed through stud (1) with washer (3), lockwasher (4), and nut (5).

2.

Install engine harness cable (6), alternator cable (10), battery cable (11), umbilical power cable (12)

(M1097A2 vehicles only), and slave receptacle cable (13) on buss bar (2) with five washers (7),

lockwashers (8), and nuts (9).

3.

Apply silicone compound to buss bar (2), so that all exposed metallic surfaces are coated.

b. Installation

a. Removal

TM 9-2320-280-20-2

Change 3

4-127

FOLLOW-ON TASK: Install battery (para. 4-79).