TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 387 of 951

TM 9-2320-280-20-2

4-84. HOOD WIRING HARNESS REPLACEMENT (Cont’d)

b. Installation

1.

2.

3.

4.

5.

6.

Position harness (21) on hood (5) in approximate mounting position.

CAUTION

Use care when routing harness. Failure to do so will cause

damage to harness.

Insert harness (21) and grommets (24) through opening in hood (5).

Connect harness leads 17E (22), 18C (23), and 91D (25) at left headlight connetors (26).

Connect harness leads 17F (22), 18D (23), and 91C (25) at right headlight connectors (26).

Secure harness (21) to hood (5) with three washers (29), clamps (28), and screws (27). Finger tighten

screws (27).

Secure harness (21) to hood (5) with two screw and washer assemblies (19) and clamps (20). Finger

tighten screw and washer assemblies (19).

4-149