TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 384 of 951

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 74)

(A2 Series and M1123)

Two locknuts (Appendix G, Item 102) (Basic

and A1 Series)

Antiseize compound (Appendix C, Item 13)

Manual

References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

• Blackout drive light assembly removed

(para. 4-50).

• Side marker light lenses and lamp removed

(para. 4-54).

TM 9-2320-280-20-2

4-146

Change 3

4-84. HOOD WIRING HARNESS REPLACEMENT

NOTE

Prior to removal, tag leads for installation.

1.

Disconnect connector plug (2) from connector receptacle (1).

2.

Remove four capscrews (7) and washers (6) from left cover plate (5) and hood (3).

3.

Remove two clips (4) from cover plate (5) and remove cover plate (5).

4.

Disconnect harness leads 489C (16) from left side marker light terminal (15).

5.

Disconnect harness leads 20E (9), 461B (20), and 491C (19) from three left composite light terminals (8).

6.

Remove locknut (12), screw (11), and left side marker light ground 92C (10) from hood (3). Discard

locknut (12).

7.

Remove capscrew (14), washer (13), and left composite light ground 92B (17) from bus bar (18).

a. Removal

This task covers:

a. Removal

c.

Installation

INITIAL SETUP:

1

2