TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 721 of 951

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four lockwashers (Appendix G, Item 138)

Felt sheet (Appendix D, Fig. 84)

Heat shield extension (Appendix D, Fig. 85)

Manual References

TM 9-2320-280-24P

TM 9-2320-280-20-2

Change 3

7-17

7-8. PARKING BRAKE HEAT SHIELD AND HEAT SHIELD EXTENSION REPLACEMENT

NOTE

• The heat shield extension is used for extra protection of the

parking brake. The replacement of it can be left up to the

discretion of the commander.

• The following procedure applies to vehicles with serial numbers

USBL Eff. 1 through 44824.

a. Removal

1.

Remove two capscrews (8) and lockwashers (7) from heat shield extension (1), heat shield (2) and

parking brake bracket (3). Discard lockwashers (7).

2.

Remove capscrew (4), heat shield extension (1), and felt sheet (5) from crossmember (6). Discard felt

sheet (5).

3.

Remove two nuts (12), lockwashers (11), heat shield (2), capscrews (9), and washers (10) from heat

shield extension (1). Discard lockwashers (11).