TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 1038 of 1168
TM 9-2320-280-20-3
Change 1
D-65
Section II.
I L L U S T R ATED MANUFACTURING INSTRUCTIONS (Cont'd)
INSTRUCTIONS:
1.
Cut aluminum sheet metal to size as shown.
2.
Locate, mark, and drill two .313-.375-in. diameter holes in left splash shield access cover as shown.
3.
Locate, mark, and drill one .406-.466-in. diameter hole in left splash shield access cover as shown.
4.
Remove all burrs and sharp edges.
5.
Paint left splash shield access cover as required. (Refer to TM 43-0139.)
Figure D-86. Left Splash Shield Access Cover.
MATERIAL BLOCK
STOCK SIZE
DESCRIPTION
SPECIFICIATION
10 X 12-FT SHEET.
ALUMINUM ALLOY
IAW QQ-A-225/8
0.08 IN. THICK
6061-T6
LEFT SPLASH SHIELD ACCESS COVER
ACCESS COVER
CUT TO SIZE
MANUFACTURED FROM
PART NUMBER
(INCHES)
NSN
12446770
AS SHOWN
Back to Top
