TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 1041 of 1168
TM 9-2320-280-20-3
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont’d)
Figure D-89. “C” Pillar Reinforcement Bracket.
lNSTRUCTIONS:
1. Cut two pieces of aluminum sheet metal to size as shown.
2. Locate, mark, and drill four 0.125-inch diameter holes in reinforcement brackets (1).
3. Bend left reinforcement bracket (1).
4. Bend right reinforcement bracket (1) in opposite direction.
D-68
Back to Top
