TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 1046 of 1168

TM 9-2320-280-20-3

Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont’d)

INSTRUCTIONS:

1.

2.

3.

4.

5

Figure D-93. Parking Brake Lever.

CAUTION

When drilling through the transmission cowl, be careful not to drill

into the transmission housing.

NOTE

The location of the mounting hole will vary depending on vehicle

configuration. Locate the hole in a suitable place, near the driver’s

seat

Drill a 1/4-in. hole in the transmission cowl (7), near the driver’s seat (10).

Cut chain (4) to desired length and install the clamp (1) on chain (4) with capscrew (5), lockwasher (2),

and nut (3).

Install chain (4) on transmission cowl (7) with capscrew (6), lockwasher (9), and nut (8).

With the parking brake applied, slip clamp (1) over lever (11) to lock it in place. When not in use, stow

the chain lock out of the way.

Paint chain lock red for easy identification.

D-73