TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 104 of 1168

1 0 - 4 9 . 1 .

THREE POINT SEAT B E LT BRACKETS REPLACEMENT (M996, M996A1, M997,

M997A1, AND M997A2)

1.

Remove two nuts (6), capscrews (4) and (5), four washers (3), and bracket (2) from body (7) and

“B” pillar (1).

2.

Remove capscrew (11), washer (10), and bracket (8) from mount (9).

b. Installation

1

.

Install bracket (8) on mount (9) with washer (10) and capscrew (11). Tighten capscrew (11) to

90-95 lb-ft (122-129 N

•

m )

.

2±

.

Install bracket (2) on body (7) and “B” pillar (1) with four washers (3), two capscrews (4) and (5), and

nuts (6). Tighten capscrews (4) to 9-11 lb-ft (12-15 N

•

m) and capscrews (5) to 20-22 lb-ft (27-30 N

•

m±)±

.

This task covers:

a. Removal

b. Installation

a. Removal

NOT E

Left and right seatbelt bracket replacement procedures are

basically the same. This procedure covers the left seatbelt bracket.

INITIAL SETUP:

Applicable Models

M996, M996A1, M997, M997A1, M997A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-280-24P

Equipment Condition

Three point seatbelt removed (para. 10-48.1).

TM 9-2320-280-20-3

1 0 - 8 2 . 2

Change 1