TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 112 of 1168

TM 9-2320-280-20-3

10-90

Change 2

10-55. CARGO BARRIER EXTENSION MAINTENANCE

Remove quick release pin (12) from post assembly (4) and remove cargo barrier extension (5) from cargo

bulkhead (13).

b. Disassembly

This task covers:

a. Removal

c.

Assembly

b. Disassembly

d.

Installation

Materials/Parts

Eight locknuts (Appendix G, Item 86)

Manual References

TM 9-2320-280-24P

INITIAL SETUP:

Applicable Models

M998, M998A1, M1038, M1038A1, M1097,

M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

a. Removal

1.

Remove screw (6) and lanyard (7) from post assembly (4).

2.

Remove twenty-four screws (1), nut and washer assemblies (3), and three backboards (2) from four

post assemblies (4).

3.

Remove eight locknuts (11), washers (9), capscrews (8), washers (9), and four mounting brackets (10)

from cargo bulkhead (13). Discard locknuts (11).

c. Assembly

1.

Install lanyard (7) on post assembly (4) with screw (6).

2.

Install three backboards (2) on post four assemblies (4) with twenty-four screws (1) and nut and

washer assemblies (3).

3.

Install four mounting brackets (10) on cargo bulkhead (13) with eight washers (9), capscrews (8),

washers (9), and locknuts (11).

d. Installation

Install cargo barrier extension (5) to cargo bulkhead (13) with quick release pin (12).

NOTE

When installing cargo barrier extension, ensure side rack pins on

post assemblies slide into holes of cargo bulkhead.