TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 114 of 1168
10-56.
CARGO TIEDOWN REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
NOTE
• For removal of rear cargo tiedown, one assistant will be needed.
• Early production vehicles will have a capscrew in place of a hex
head screw.
1.
Remove hex head screw (1) and front cargo tiedown (2) from cargo floor (3).
2.
Remove locknut (7), washer (6), hex head screw (4), and rear cargo tiedown (5) from cargo floor (3).
Discard locknut (7).
INITIAL SETUP:
Applicable Models
All except M996, M996A1, M997, M997A1,
M997A2, M1037, M1042
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Locknut (Appendix G, Item 79)
Manual References
TM 9-2320-280-24P
Personnel Required
One mechanic
One assistant
b. Installation
NOTE
For installation of rear cargo tiedown, one assistant will be needed.
1.
Install front cargo tiedown (2) on cargo floor (3) with hex head screw (1). Tighten hex head screw (1)
to 65 lb-ft (88 N
.
m).
2.
Install rear cargo tiedown (5) on cargo floor (3) with hex head screw (4), washer (6), and locknut (7).
Tighten locknut (7) to 65 lb-ft (88 N
.
m).
TM 9-2320-280-20-3
10-92
Change 2
2
1
3
3
4
5
6
7
~
Back to Top
