TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 115 of 1168

10-57. FIRE EXTINGUISHER BRACKET REPLACEMENT

This task covers:

a. Removal

b.

Installation

a. Removal

1.

Turn two wing head studs (4) and remove driver’s seat base retainer plate (7) from driver's seat

base (3).

2.

Remove four locknuts (1), washers (2), capscrews (6), washers (2), and fire extinguisher bracket (5)

from driver's seat base retainer plate (7). Discard locknuts (1).

NOTE

M1097A1, M1097A2, and M1123 models fire extinguisher bracket

and retainer plate is mounted on the floor, left side of driver’s

seat, with capscrews securing retainer plate instead of wing head

studs.

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four locknuts (Appendix G, Item 70)

Manual References

TM 9-2320-280-24P

b. Installation

1.

Install fire extinguisher bracket (5) on driver's seat base retainer plate (7) with four washers (2),

capscrews (6), washers (2), and locknuts (1). Tighten locknuts (1) to 6 lb-ft (8 N·m).

2.

Install driver's seat base retainer plate (7) on driver's seat base (3) with two wing head studs (4).

TM 9-2320-280-20-3

Change 2

10-93

M1097A1, M1097A2,

AND M1123